I might let a shop do this if get some of these .How many hours should it take.How hard a job is it.I have done headers in my ls1 but wan't much fun.

I have fair amount of tools. If its a huge nightmare was thinking of waiting till get some heads and then do headers,headsa and my new 305 comp cam and 1.6 rockers and stuff all at same time.

Is there any link to mac install?

 

When I did mine it didn't take very long for changing the headers. Maybe 3 hrs. The problem I ran into which turnded the job into a two day deal was an exhaust bolt broke of in the head. I had to remove the head to get the bolt out so that added a bunch of hrs. to the job.

 

6-10 hrs

 

http://www.fastblackcar.com/camaro/mac_headers.html

 

I would plan at least 10 hours. There is always something that slows you down.

Dan

 

That is what I live by! I always think somthing is going to shorter than what it actually turns out to be. Alwaya, always, always count on some sort of delay when you work on these f-bodies.

 

Or anything, for that matter.