LT4 Valve Cover Gaskets Part #'s Needed
Thread Starter
Registered User
Joined: Jun 2004
Posts: 717
LT4 Valve Cover Gaskets Part #'s Needed
Got my whammy jammy LT4 valve covers today. Does anyone have the GM or Felpro part numbers for the gaskets handy? Yes I checked ShoeBoxes site and did a search first. Thanks
Registered User
Joined: Mar 2000
Posts: 1,955
From: Point Pleasant, NJ... USA
GM part #'s for LT4 covers:
10108625- LT4 valve cover gasket [2 req'd]
10108674 - Stud,Valve cover mounting [4 per Valve cover]
10108675- Bolt,Valve cover mounting [ 4 per valve cover]
12555685- Cap, Oil fill [ 1 Required for psgr valve cover only.]
10240678- Grommet, pcv [1 Required. Comes with the psgr valve cover. ]
10108626- Seal, mounting bolt [8 req'd,1 per bolt ]
'Valve cover Gasket Mounting Bolt Seals' are included with the covers. Psgr cover comes with PCV grommet. The rest of above mentioned parts are not included, and must be purchased seperately.
10108625- LT4 valve cover gasket [2 req'd]
10108674 - Stud,Valve cover mounting [4 per Valve cover]
10108675- Bolt,Valve cover mounting [ 4 per valve cover]
12555685- Cap, Oil fill [ 1 Required for psgr valve cover only.]
10240678- Grommet, pcv [1 Required. Comes with the psgr valve cover. ]
10108626- Seal, mounting bolt [8 req'd,1 per bolt ]
'Valve cover Gasket Mounting Bolt Seals' are included with the covers. Psgr cover comes with PCV grommet. The rest of above mentioned parts are not included, and must be purchased seperately.
Last edited by Mtrhds94Z; Jul 12, 2004 at 05:05 PM.
Registered User
Joined: Dec 1969
Posts: 27,727
From: Little Rock, AR
Another number to throw out is 12557604, which is the Corvette PCV/CCV hose that goes from the throttle body to the RH valve cover. It does not seem to fit perfectly on my car, though. <shrug> I have a hard time trying to keep the plastic elbow from popping up from the valve cover grommet.
Registered User
Joined: Mar 2000
Posts: 1,955
From: Point Pleasant, NJ... USA
Originally posted by shoebox
Both of mine came with the gaskets. Did you get the 12555685 oil cap, too?
Charlie, you listed the gasket p/n for the bolt seals too.
Both of mine came with the gaskets. Did you get the 12555685 oil cap, too?Charlie, you listed the gasket p/n for the bolt seals too.
It's 10108626 not 8625
Also, I am under the impression that they come with the seals [and the PCV grommet] but not the gaskets?
Thanks Rob!..
Registered User
Joined: Mar 2000
Posts: 1,955
From: Point Pleasant, NJ... USA
Originally posted by 944v8inDFW
Weird factory sealed in plastic. 1 Had seal 1 did not.
Weird factory sealed in plastic. 1 Had seal 1 did not.
I am under the impression they come with those seals, but not the gaskets?Did you get a gasket in one?
Did the PCV grommet come with the psgr side cover?[it should]
Thanks..
Thread Starter
Registered User
Joined: Jun 2004
Posts: 717
Clear some things up and #'s
My set came 100% complete (new) with all the studs, seals, oil cap, vent grommet. What it did not come with is 1 valve cover gasket. I didn't feel like waiting for a few days on UPS ground so i bought some at my local parts store. Bougt the Felpro set because my friggin local GM dealer has to order everything 
(except a high service bill) Anyway the Felpro number is VS50443R. Set includes 2 VC gaskets and the 8 stud seals. Under $20 out the door with tax.
Thanks for the help.
(except a high service bill) Anyway the Felpro number is VS50443R. Set includes 2 VC gaskets and the 8 stud seals. Under $20 out the door with tax.Thanks for the help.
Last edited by 944v8inDFW; Jul 13, 2004 at 02:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
