LS1 Plastic Gas tank.
Thread Starter
Registered User
Joined: Dec 2003
Posts: 2,724
From: Oklahoma where trees are made of wood.
Re: LS1 Plastic Gas tank.
Found this nice tidbit, has some pictures of the inlet of the tank.
http://www.public.asu.edu/~nicolasd/
On this guys sight goto performance scroll down through his stuff a ways, he talks about installing a Walbro in his 99 tank, click on his link and it has some nice pictures of the pump assembly there.
http://www.public.asu.edu/~nicolasd/
On this guys sight goto performance scroll down through his stuff a ways, he talks about installing a Walbro in his 99 tank, click on his link and it has some nice pictures of the pump assembly there.
Last edited by WS Sick; Sep 24, 2004 at 09:06 AM.
Thread Starter
Registered User
Joined: Dec 2003
Posts: 2,724
From: Oklahoma where trees are made of wood.
Re: LS1 Plastic Gas tank.
Looking at this guys pump change guide it appears the LS1 has three lines coming into the tank whereas the LT1 has 4. One of the LT1s I know is a vent, one pressure ,and the other return, what is the 4th one?
What does the LS1s represent?
He also says that there is two fuel lines connected to the LS1 factory pump. and he cuts one and discards it with the Walbro install on an LS1.
What does the LS1s represent?
He also says that there is two fuel lines connected to the LS1 factory pump. and he cuts one and discards it with the Walbro install on an LS1.
Thread Starter
Registered User
Joined: Dec 2003
Posts: 2,724
From: Oklahoma where trees are made of wood.
Re: LS1 Plastic Gas tank.
Found this its a guy swapping an LS1 into a 240 Z, he is even using the stock F-body plastic tank!!!
http://240z.jeromio.com/motorswap/index.html
http://240z.jeromio.com/motorswap/index.html
Thread
Thread Starter
Forum
Replies
Last Post
Magenta_Hearts
General 1967-2002 F-Body Tech
4
Mar 5, 2015 07:01 AM
Deadbolt24
LS1 Based Engine Tech
1
Jan 19, 2015 01:29 PM