Here is a link to them. Note: they are not aluminum heads.

http://cgi.ebay.com/ebaymotors/ws/e...&category=33617

I had already posted this in the lounge but im not getting much for response over there.

Aaron

 

never buy ported heads without flow numbers
you are asking for trouble

 

I agree with Trey. NO WAY would i spend money on heads without flow numbers. Just wouldnt make sense to.

 

I did. I know where he lives too though....

 

Take some basic measurements before you buy them and then have them flow tested and cc'd at a shop. If you buy correctly, you can change things later. Always expect to have to reguide them, reseal them and at least lap the valves. If all that still gives you a good price, go for it.

Have saved hundreds over the years doing that. Just remember the cardinal rule "buyer be ware" check over everything extremely carefully first.