installed F.A.S.T. no start!!
05-07-2005, 06:46 PM
#1
Registered User
Thread Starter
Join Date: Sep 2000
Location: Finally back in CALI! fck iraq!
Posts: 164
installed F.A.S.T. no start!!
I installed my FAST bank-to-bank with wideband the other night and could not get it to start. The best it would do is fire up and as soon as it fired up it would immediately die. I wired everything up to my stock computer very methodically and there is no way that i could have missed a splice or had one grounding out etc...
Possibilities:
1. There was ONE wire. on the third step of the instuctions it said to splice BLK/WHT wire from FAST computer into BLK/WHT wire in GM PCM A(red connector) cavity 18. The only colore wire in A 18 was a TAN/WHT wire. The rest of the instuctions were perfect. I tried starting it with it connected to A 18 and without connected. No difference.
2. I left my O2 sensor unpluged. I know that it should be connected but i didn't have time to do it yet and just becasue my o2 isn't hooked up dosn't meen that the car shouldnt start...
any thoughts???
-Tony
Possibilities:
1. There was ONE wire. on the third step of the instuctions it said to splice BLK/WHT wire from FAST computer into BLK/WHT wire in GM PCM A(red connector) cavity 18. The only colore wire in A 18 was a TAN/WHT wire. The rest of the instuctions were perfect. I tried starting it with it connected to A 18 and without connected. No difference.
2. I left my O2 sensor unpluged. I know that it should be connected but i didn't have time to do it yet and just becasue my o2 isn't hooked up dosn't meen that the car shouldnt start...
any thoughts???
-Tony
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
10-31-2016 11:09 AM
PFYC
Supporting Vendor Group Purchases and Sales
0
01-23-2015 01:13 PM
Oncomingstorm22
General 1967-2002 F-Body Tech
4
01-22-2015 07:15 PM