what's the most reliable ignition coil for a 93 z28, lt1, with a Crane hi6 ignition box...

i had mine installed 2 months ago (dealer install) and ruined the crane coil already...

should i just switch to an accel 300+ box and coil, or keep my crane box and go to a stock coil?

will a stock coil work on an igntion box?

sorry if im wasting time here, just trying to get my car up and running again.

 

You may want to try out either an MSD Ignition Coil or Accel Ignition Coil. I would not bother putting another stocker.

 

A stock coil will work. Any coil (aftermarket or not) can fail (and sometimes do). From posts I have read, no brand is immune from failure.

 

Digital 6 and the stock coil here with no problems at all. I thought about going with an MSD or any of the other aftermarket coils, but from what I read and people I talked to, I went with the stocker. No complaints.

 

Isnt the stock coil good up to 600hp or something crazy like that?