LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

I think im overheating

Thread Tools
 
Search this Thread
 
Old Oct 4, 2004 | 06:44 PM
  #1  
brad20653's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 74
I think im overheating

I bleed the system, can i do it with the cap off? If i leave the cap off it gets the bubbling bad then comes out the cap while its off. Maybe didnt bleed enough??
Old Oct 4, 2004 | 06:54 PM
  #2  
944v8inDFW's Avatar
Registered User
 
Joined: Jun 2004
Posts: 717
Re: I think im overheating

i blead with the cap on after fully filling the system. otherwise with the cap off you are just letting air in at the high point. Oh yeah protect your opti with a bunch of rags or paper towels
Old Oct 4, 2004 | 08:18 PM
  #3  
brad20653's Avatar
Thread Starter
Registered User
 
Joined: Sep 2004
Posts: 74
Re: I think im overheating

Ive bled and bled and still gets near overheating, stays right around the line right before the red then drops a little then back, then when i shut off i see steam and hear some bubbling.
Old Oct 4, 2004 | 10:14 PM
  #4  
BoobSter-lt1-z's Avatar
Registered User
 
Joined: Jun 2003
Posts: 329
From: California (san fernando valley)
Re: I think im overheating

Hey...check this link out...sounds like the same problem i had...might be helpfull

http://web.camaross.com/forums/showt...=1#post2529125
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
damnyankee36
LS1 Based Engine Tech
5
Sep 9, 2015 07:06 PM
Pwilson59
South Atlantic
1
Sep 3, 2015 08:47 PM
Noct
General 1967-2002 F-Body Tech
2
Jul 14, 2015 01:18 AM
thenewkid
General 1967-2002 F-Body Tech
4
Jul 2, 2015 07:16 AM
warmeck
General 1967-2002 F-Body Tech
19
Apr 16, 2015 05:50 PM




All times are GMT -5. The time now is 03:03 PM.