how to take off throttle body? to clean
Thread Starter
Registered User
Joined: Feb 2003
Posts: 685
From: CENTRAL CALIFORNIA
how to take off throttle body? to clean
i was wondering besides the main four bolts that the throttle body has what is needed to take off and what can i use to clean it with?? thanks on any help
Registered User
Joined: Jan 2001
Posts: 2,148
From: Bay Area, CA
4 bolts with a 10mm socket, and the stuff to the "right" of the TB when facing it. Throttle cables you can do by hand, and the bracket has 3x 10mm bolts which are a little tough to get to if you have big hands, a 12 point wrench is nice.
As for the plastic piece it hasn't been on my car in so long I forget how it even comes off, I imagine its just some small bolts, 5/16" or 10mm probably(?)
You could also consider just cracking the TB blades and cleaning it, as long as you use a rag that isn't going to put alot of fibers in the area.
As for the plastic piece it hasn't been on my car in so long I forget how it even comes off, I imagine its just some small bolts, 5/16" or 10mm probably(?)
You could also consider just cracking the TB blades and cleaning it, as long as you use a rag that isn't going to put alot of fibers in the area.
Registered User
Joined: Mar 2003
Posts: 1,574
From: PA
Originally posted by Dr.Mudge
4 bolts with a 10mm socket, and the stuff to the "right" of the TB when facing it. Throttle cables you can do by hand, and the bracket has 3x 10mm bolts which are a little tough to get to if you have big hands, a 12 point wrench is nice.
As for the plastic piece it hasn't been on my car in so long I forget how it even comes off, I imagine its just some small bolts, 5/16" or 10mm probably(?)
You could also consider just cracking the TB blades and cleaning it, as long as you use a rag that isn't going to put alot of fibers in the area.
4 bolts with a 10mm socket, and the stuff to the "right" of the TB when facing it. Throttle cables you can do by hand, and the bracket has 3x 10mm bolts which are a little tough to get to if you have big hands, a 12 point wrench is nice.
As for the plastic piece it hasn't been on my car in so long I forget how it even comes off, I imagine its just some small bolts, 5/16" or 10mm probably(?)
You could also consider just cracking the TB blades and cleaning it, as long as you use a rag that isn't going to put alot of fibers in the area.
Registered User
Joined: Apr 2003
Posts: 87
From: Shreveport LA
you should polish it too. i used a dremel tool and polished it to a mirror like shine using dremel polishing compound. after polishing both that and the maf i had much better throttle response. but they also had 160,000 miles of crap on them.
Registered User
Joined: Apr 2003
Posts: 87
From: Shreveport LA
i bought it at the home depot for 50 dollars, there are different heads you buy for it. it has come in handy on my car for things like modifing my air box, and it is very useful around the house to. i plan on polishing my heads with it when they come of in the winter. if you buy it buy the polishing kit from dremel. it works really good.
Registered User
Joined: Apr 2003
Posts: 87
From: Shreveport LA
Originally posted by Dave88LX
What exactly are you polishing? I just took mine off tonight, it's preetty ****ty looking!
What exactly are you polishing? I just took mine off tonight, it's preetty ****ty looking!
Thread Starter
Registered User
Joined: Feb 2003
Posts: 685
From: CENTRAL CALIFORNIA
hey guys do you think its safe if i put the top plate of the throttle body with out the gasket because the gasket looks like its ready to rip into pieces what do you guys think?
Thread
Thread Starter
Forum
Replies
Last Post
