how to route opti hoses
Thread Starter
Registered User
Joined: Oct 2001
Posts: 342
how to route opti hoses
where do the hoses route to? I know one needs a vaccum source but from the intake manifold or TB? The other I'm not too sure about.
BTW, this is for an LT1 transplant into an RX7.
BTW, this is for an LT1 transplant into an RX7.
Administrator
Joined: Nov 1998
Posts: 71,119
From: Hell was full so they sent me to NJ
From Shoebox's Tech Pages:
http://shbox.com/1/opti_vacuum_conn.jpg
That connection is on the drivers side of the intake. And that's the line with the little blue/white filter and check valve.
The blue plastic elbow on the air supply line goes to the intake bellows, between the MAF sensor and the throttle body.
http://shbox.com/1/opti_vacuum_conn.jpg
That connection is on the drivers side of the intake. And that's the line with the little blue/white filter and check valve.
The blue plastic elbow on the air supply line goes to the intake bellows, between the MAF sensor and the throttle body.
Thread
Thread Starter
Forum
Replies
Last Post
Sergio
LT1 Based Engine Tech
11
Jan 27, 2016 04:27 PM
