how much to port stock heads

Reply Subscribe

Thread Tools

Search this Thread

Oct 29, 2003 | 05:30 PM

chevyboy_z28

Thread Starter

Registered User

Joined: Aug 2002

Posts: 470

From: Detroit, MI

how much to port stock heads

on average, how much would a good port job cost, and who does a good job?...not too expensive too

Oct 29, 2003 | 05:35 PM

drewstealth

Registered User

Joined: Mar 2003

Posts: 1,623

From: Fairfield, ca

read ur last post

Oct 29, 2003 | 05:43 PM

Eddie Z-28

Registered User

Joined: Oct 2000

Posts: 449

From: Wilkes-Barre PA

I'd be interested to know how much it would cost as well.

Oct 29, 2003 | 06:18 PM

amean94ta

Registered User

Joined: Jul 2003

Posts: 1,991

From: pa

for $400 at krs machining in erie pa they can make your heads just as good as the afr's that cost $1,100 phone number ............(814)455-8854 ask for todd

Oct 31, 2003 | 12:37 PM

Dave88LX

Registered User

Joined: Oct 2002

Posts: 2,168

From: AACO, MD

$300-$700.

Oct 31, 2003 | 06:51 PM

Z95m6

Registered User

Joined: Oct 2001

Posts: 6,070

From: newton, kansas, USA

www.advancedinduction.com

Oct 31, 2003 | 06:54 PM

FastWhiteTA

Registered User

Joined: Oct 2003

Posts: 537

From: Was TX, now in Portland, OR

I have a friend that does a bangin job for $550, ports, polishes, 3 angle valve job, milled...they flow about 265 cfm at .500....haven't seen the mid range numbers yet. But he has two 7.5x second cars.

Oct 31, 2003 | 10:51 PM

NOMAD

Registered User

Joined: May 2000

Posts: 1,327

From: Under my Car as usual :)

Quote:

Originally posted by Z95m6
www.advancedinduction.com

Nov 1, 2003 | 12:51 AM

QCKZ28

Registered User

Joined: Feb 2003

Posts: 1,853

From: Christiansburg, VA

do a seach for lloyd elliot on this board, great work,great guy to deal with, best bang for the buck, also look at www.cmotorsports.com great headwork there too.
good luck there is lots of choices out there