I am in search for an awesome set of heads. I actually don't know what to look for when it comes to heads? If anyone could help me out I will appreciate it very much. I was thinking of going with some high performance LT4 Heads. What do you think???

 

IT WOULD WOULD BE A NICE START SUMMIT SELLS A LT4 COVERSION IT INCLUDES HEADS,INTAKE,CAM,ROCKERS,PUSH RODS COST AROUND 2600.00 I THINK WOULD BE A REAL NICE BOLT ON KIT

 

I seen the LT4 conversion kit but I'm thinkin alot of people are going to do it so I want to build my own kit. I also plan on doing a 396 stroker. There has to be better aftermarket heads for the LT4. And thats what I'm looking for.

 

AFR LT4 heads are what you want.....then have someone like phil at AI port them for you.

 

I just checked out the AFR Heads and they are just what I was looking for, Thankx Alot!!!

 

You should list some goals IMO, as most could save $1k+ on aftermarket castings & spend more on higher quality work & meet their goals with production castings.

A budget is always good too, expect to spend $1500-2k in labor/machinework/parts, whether it's on a $200 set of stockers or a $1000 set of afr/gm lt4's.