hi iam new and need some advice
Thread Starter
Registered User
Joined: Jan 2003
Posts: 43
hi iam new and need some advice
sup guys i just bought a 94 z28 m6 last week and need some advice for mods.I am completely stock and don't know where to start.any web sites that specialize in lt1's.eventually i want to go the stroker route(355-383).I need to know what parts i should be looking for.I used to have a 89 5.0 but just got tired of the headaches it was giving me.so i don't know anything about lt1 cars,and i hope you guys can help me out.
Registered User
Joined: Sep 2002
Posts: 3,456
www.ws6.com
That can be a starting point, plus use the SEARCH feature in this forum and a lot of questions can be answered.... Just type in a key word and watch all you seek pop up..
And remember, no question is stupid, it prob been repeated a few times.....
Welcome to the LT1 crowd...
93Z Will
That can be a starting point, plus use the SEARCH feature in this forum and a lot of questions can be answered.... Just type in a key word and watch all you seek pop up..
And remember, no question is stupid, it prob been repeated a few times.....
Welcome to the LT1 crowd...
93Z Will
Registered User
Joined: Aug 2002
Posts: 2,325
From: BC
Re: hi iam new and need some advice
Originally posted by z_great94
sup guys i just bought a 94 z28 m6 last week and need some advice for mods.I am completely stock and don't know where to start.any web sites that specialize in lt1's.eventually i want to go the stroker route(355-383).I need to know what parts i should be looking for.I used to have a 89 5.0 but just got tired of the headaches it was giving me.so i don't know anything about lt1 cars,and i hope you guys can help me out.
sup guys i just bought a 94 z28 m6 last week and need some advice for mods.I am completely stock and don't know where to start.any web sites that specialize in lt1's.eventually i want to go the stroker route(355-383).I need to know what parts i should be looking for.I used to have a 89 5.0 but just got tired of the headaches it was giving me.so i don't know anything about lt1 cars,and i hope you guys can help me out.
Registered User
Joined: Feb 2001
Posts: 1,746
From: Hemet, CA
Ahhh, the opening mods... 
Okay, M6...If you haven't already, you need to lose the CAGS (skip shift)... Short shifter is a must have. Pro 5.0 or similar piece is good..
To start you definately need to get yourself a K&N FIPK or Moroso CAI. Catback is next. Most would advise you to stay away from the Flowmaster catbacks.. I will definately say DO NOT waste your money on a Borla. That's too much money that could be better spent elsewhere (sorry Borla lovers)
IMO you should get an SLP Loudmouth
Upgrade your MAF sensor and get the computer straightened out.. Either with Hypertech, or as many on here like better, sending the PCM out to be tuned. Either way, it needs to be done.
Congrats on the new Z28. I still miss mine from time to time.
Okay, M6...If you haven't already, you need to lose the CAGS (skip shift)... Short shifter is a must have. Pro 5.0 or similar piece is good..
To start you definately need to get yourself a K&N FIPK or Moroso CAI. Catback is next. Most would advise you to stay away from the Flowmaster catbacks.. I will definately say DO NOT waste your money on a Borla. That's too much money that could be better spent elsewhere (sorry Borla lovers)
IMO you should get an SLP Loudmouth
Upgrade your MAF sensor and get the computer straightened out.. Either with Hypertech, or as many on here like better, sending the PCM out to be tuned. Either way, it needs to be done.
Congrats on the new Z28. I still miss mine from time to time.
Last edited by kick Z tail out; Jan 25, 2003 at 09:53 AM.
Thread
Thread Starter
Forum
Replies
Last Post
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM
WobblySausage
Drivetrain
4
Oct 7, 2015 10:09 AM