I just bough a set of LE2 heads from this board, what head gasket should I use the heads are new thanks Ron

 

felpro. JMHO

 

Another option many guys do(including myself).....If you want to bump the compression up a small bit, you can go with the Impala gaskets(29thou thickness)..or the Mr gasket 5716's(26thou thickness) head gaskets....the stock head gaskets are around 50thou thick, and the fel-pros (although a pretty good gasket) aren't much thinner....another benifit, the thinner gaskets will help optimize your quench.....Myself, I personaly like the quality a little better on the Impala gaskets.......