im looking at getting a cc306 cam for my car, all the things i have right now are in my sig., which heads would go best w/ this cam?? idk if i should just port my stock ones? or go w/ some heads from afr or somethings....thanks

 

talk to LE about a LE1,2 or 3 package.. It'll work well together and make great power.. from what i have seen posted on here..

 

+1 with Lloyd Elliot.

 

+365 gazillion bijillion for Lloyd.

Oh yea, ditch the 306 and get his whole package.

 

Might talk to Ai, i've seen both the heads up close the Ai stuff looks much nicer.

 

Get a LE3 package. It comes with ALL ya need except RR's and there is NO brain damage as to what ya need. It is an all in 1 package.

 

yeah LE all the way, already have a few parts in the LE2 process (including a nice set of 93 heads) good luck!

 

I have a pair of 10128374s at AI right now! They may cost a little more however, I feel my car is worth it.

MIke

 

You won't be disappointed with them.

 

go with lloyd !! he'll give ya what u need i have my le2 setup on the way deff cant beat it great customer service all the way

 

lloyd elliot. eportworks.com

 

From my own experience, Lloyd is the man. Completely customer oriented, he'll make sure that you get what you need.

 

+1 Lloyd, I plan on going to him down the line.

 

luv my afr190's mid lift flow numbers are great and peak is as well plus alot more meat to keep porting gotta find a way to keep up with those ls1 ls6 heads and lt1 castings just aint got enough meat to keep with a ported ls1 head

 

AI's full race port 190 head package is cheaper than le3 package. I have a set of heads on the way to ai. There is alot of pro's and cons to both head porters though, but I think AI will give u want u need instead of what u want (if u understand that completely). If u get a chance to check out their site www.advancedinduction.com read a little about Rick Abare's car. Totally amazing what it did with a little ol 190 head in a 3400 lb car. Pure science.