http://www.go-breslin.com/text.html

I am looking for the right sized Header Bolts... Not sure if this matters, but they are Pacesetter LT's no emission headers...

I don't see a LT1 size there... but was curious if any of bolts were the same spec or what... they give the LS1/LS6 specs...


8mm x 25mm" and it's a 12 Point...

I see 3/8 x 1" for sbc and ford... also a 3/8 x 3/4 for sbc and fords...

would any of these be ideal?

 

3/8 x 1 and definately get the 12-point headed bolts.

 

The 3/8's for sbc's will work. I'm more of a fan of 6 point bolts, that way you can still get an open faced wrench on them.

 

12 point or 6 point concerns me... but not really. I just want it to fit!! hahaha

Thanks fellas

 

I just put one of mine in 5 minutes ago, never needed to use an open end wrench on any of them. My Breslins work great! Too bad they're $5 each.