I am away from my manual and have to reinstall my transmission tomorrow morning. I need to find out what the torque specs are for the:

1. PP housing
2. trans adapter housing
3. trans-to-adapter housing
4. trans cross member
5. U-jpint retainer clips/straps

Thanks

 

MAy be this will help http://www.bfranker.badz28.com/fbody/torquespecs.htm

 

Thanks, I will have to remember that is there.

Unfortunately it didnt have any of the 6-speed tranny torque specs that I NEED.

Someone help! PLEASE!

 

1. PP bolts? 22 lb. ft.

2. flywheel housing 35 lb. ft.

3. transmission bolt 26 lb. ft.

4. trans mount nut 37 lb. ft. same for crossmember to chassis bolt (also contradiction on another page that says it's 43)

5. u-joint straps 16 lb. ft.

 

Thanks Shoebox,

I knew you would come through.
I almost emailed you specifically!