Hey guys I'am getting a new set of Dart 18 deg heads for my 383 LT1 need to know who's the best out there on changing the water flow so there work with my motor. PLEASE HELP!!!!

 

come on guys need a little HELP!!!!!!!!!

 

Dennis At Airflow Development is doing mine.. pm him at airflowdevelop on here and he should be able to point you in the right direction

 

Thanks bro do he have a web site

 

not that i know of.. but i do know he's kinda swamped right now w/ work... so.. pm him and see what he say's...

 

dart 18's are gravy...and yes I do have a website, but we have pulled it from over-welming email and phone traffic (I'm a small band, and will stay that way..)

If you can't get anyone else to do it, we can take care of this pretty quickly as it is a fairly easy job with maskins nice castings.

my email is dennis@afdracing.com

NOTE: mods, if I need to pay sponsorship to help your member out, send me a bill...this is not ment to be marketing just helping the guy out, but rules are rules.

Dennis

 

THANKS BRO I;ll get back with you real soon later

 

Please read the "sticky" at the top of the forum listing regarding excessive use of "TTT". Its ridiculous to post, wait 13 minutes, and then start demanding an answer. You are required to wait 24 hours before forcing your thread up to the top. PLEASE follow the rules.

 

What about different pistons due to the swap frm 23 degree head to 18 degee?

 

fresh build motor have to get piston anyway

 

What's this swap worth in HP? BTW, what happened to AI sponsorship? Choose not to renew it?

 

Is it necessary though with a low lift cam?

 

i'm not sure but even stock piston's have valve pocket's in them.. so it's probably a yes regardless of lift...

 

He is fixing to find out that 18* won't work with pistons for 23* with out heavy mods.

 

hey bro who said i was using 23 deg piston this is not my first go around buliding motor I've done this min of time mostly OLD SCHOOL motor.this is my first time with the LT1 style motor but i know what doing Mr 1racerdube!!!!!!!!