FLP Y-Pipe Diameter
#1
FLP Y-Pipe Diameter
I have FLP long tubes and Borla CB on my 1996 WS6. Can anyone tell me the diameter of the Y-Pipe where it meets the intermediate pipe for the Borla? I know the Borla intermediate pipe is 3". The clamp connecting the y-pipe to intermediate pipe broke and i need to order a new one. It's a strange looking wrap-around clamp about 5-6" long. Any help is appreciated.
Thanks,
Loren
Thanks,
Loren
#2
Re: FLP Y-Pipe Diameter
The style clamp i need is here:
https://www.summitracing.com/parts/s...00-1/overview/
I just don't know the diameter for the y-pipe side. The diameters are slightly different.
https://www.summitracing.com/parts/s...00-1/overview/
I just don't know the diameter for the y-pipe side. The diameters are slightly different.
#4
Re: FLP Y-Pipe Diameter
For anyone else out there with FLP longtubes, i hope this helps you. I go through clamps often because my car is lowered.
Header collector clamp:
Vibrant Performance Quick-Release V-Band Clamps 1491C, 3.0"
Y-pipe clamp:
Vibrant Performance Quick-Release V-Band Clamps 1490C, 2.5"
Available from Summitt
Header collector clamp:
Vibrant Performance Quick-Release V-Band Clamps 1491C, 3.0"
Y-pipe clamp:
Vibrant Performance Quick-Release V-Band Clamps 1490C, 2.5"
Available from Summitt
#5
Re: FLP Y-Pipe Diameter
Oh, and the clamp my post was originally about:
Dynatech 789-70300 - Dynatech Exhaust Band Clamps
Exhaust Band Clamp, Lap Joint, Stainless Steel, 3.0 in. Diameter, Each
Dynatech 789-70300 - Dynatech Exhaust Band Clamps
Exhaust Band Clamp, Lap Joint, Stainless Steel, 3.0 in. Diameter, Each
Thread
Thread Starter
Forum
Replies
Last Post