HOW YOU LIKE DEMS APPLES!

Let the HP begain...but how do you wire this darn thing up? anyone got an installpage?

 

It looks like a real nice peice. I'm surpised that it didn't come with installation instructions though. You would think it would.

 

It didn't talk about wiring just about customizing the Fan shroud to fit the unit.

 

CSI install.

 

I thought you didnt have to modify the fan shroud with the CSI...

 

You have to take out the old impeller in the stock water pump so that it can fit, the you bolt it up.

 

Meizerres are the drop ins. The CSI you have to do the Cutting and Grinding. Instructions aren't very helpful. Does anyone have a wiring diagram?

 

Everyone says that since the CSI isn't as tall as the Meziere, you don't have to modify the fan shroud.

 

Water pump housing

 

For some reason I'm rather partial to this wiring scheme

http://stevil.easy48.com/AIR-CSI.htm

Thanks Stevil

 

Mine was butted up against the fan shroud so I did remove a little material, fwiw.

 

no its miezier that you have to cut, not the csi. i have a mezier and a buddy has a csi, mines cut his dropped in.

 

You people have all your info *** backwards. If you dont know what you are posting, DONT post it.

CSI pumps require modifying the water pump housing. You need to pull out old impellor and cut little tabs so that the pump slides in. NOTHING needs to be done with fan shroud.

Mezeire pump just needs impellor removed.

Mezeire HD needs impellor removed and fan shroud clearanced.

 

im talkign bout fan shroud. yes the csi will need the water pump housing to be modified, ground. the mezier just needs the impelly taken off.

 

DARNIT I CORRECTED MYSELF AND SAID WATERPUMP HOUSING!

Besides some people do end up messing with the fan shroud