turnin20s

I finally got around to getting the heads off of my motor, but I still need to get the balancer off before I can get it all the way apart. And for those of you who don't know I spun the #1 rod bearing

Heres Some Pics...



All Of The Metal Filings In My Oil Pan

And Heres My New Heads & TA That I picked Up From A Friend
Specs: 2.02 Stainless Intake Valves, 1.6 Stainless Exhaust Valves, Ported & Polished But No Flow #s (Pics Against The Stockers)
Ported On The Left

Ported On The Top




Sorry for the completely random post, but I'm just getting excited LOL

JooneJune

Who did your port job?

turnin20s

A place here in Wisconsin. Dodgeville to be exact, my buddy had the work done a couple years ago and he doesn't remember much about them but the valve size but the heads look sweet, I'll try to get some better pics when they come back from being cleaned.

sworaz

Where in Wisconsin are you from? I'm in Madison.

turnin20s

I'm by richland center, about halfway between madison and lacrosse. I'm actually in madison quite a bit though

sworaz

I'll pm you my number, if your ever in town shoot me a call. Are you going to Automotion in Dells, or Speed open house?

2000GTP

When is Speed having their open house?

sworaz

It's on April 21st here's a link to their myspace page with some pics and details.
http://www.myspace.com/boostnation

2000GTP

Alright thanks. I didn't see anything on their site.

turnin20s

Planning on the dells, but I'm not sure about speed, thats kinda far for a fresh setup and I'm not sure it it will be done by then.

Dave89IROC

what brand T/A is that?

looks like a Spohn

turnin20s

Yep, I'm also going to be doing LCAs and panhard bar before it hits the road.

z28_theantirice

Look for a Quasar Blue LT1 on the street at Automotion, awesome event cant wait!
http://www.wisdells.com/events/automotion.cfm