Estimate on my 1/4 mi time?
Estimate on my 1/4 mi time?
im gettin ready to send my car to the shop, i was wondering what you would think it would be running...here is the list of stuff im getting done, or already have done:
3:73 Gears
PaceSetter Shortys
Stock Heads Ported to Int.2.02 Exh.1.60
Intake Ported
Hot Cam Kit
and how much would a Pro Charger help me?
3:73 Gears
PaceSetter Shortys
Stock Heads Ported to Int.2.02 Exh.1.60
Intake Ported
Hot Cam Kit
and how much would a Pro Charger help me?
Re: Estimate on my 1/4 mi time?
Hmm i think you need to research your mods more carefully before just spending money and sending it off. Oh and you'll need a tune for a dif cam. Hotcam kit is good but i would search around to see if it will meet your needs.
Pacesetter shorties are junk go with long tubes. Look into a le1 heads cam kit its like 1100 bucks and is much better than some ported heads and a hotcam. Go here www.eportworks.com.
Also have you considered doing the work yourself...with the cost of labor savings you could buy a nice set of tools and have more satisfaction with your car.
Pacesetter shorties are junk go with long tubes. Look into a le1 heads cam kit its like 1100 bucks and is much better than some ported heads and a hotcam. Go here www.eportworks.com.
Also have you considered doing the work yourself...with the cost of labor savings you could buy a nice set of tools and have more satisfaction with your car.
Re: Estimate on my 1/4 mi time?
Can anyone estimate my 1/4 time? My first time at the track I ran a 13.8@100.31 MPH with the following:
Bald street tires
LPE CAI
160* thermo.
Madz28 tune
Random Tech cat back system
Cracked bellhousing on tranny
I have since added:
OTVC wires
NGK plugs
Full tune up
LT headers with 3" ORY and 3" cutout
BFG KDWS tires
New tranny
Removed AIR system
You guys think I will run into the 13.2-4 range? It's an A4.
Bald street tires
LPE CAI
160* thermo.
Madz28 tune
Random Tech cat back system
Cracked bellhousing on tranny
I have since added:
OTVC wires
NGK plugs
Full tune up
LT headers with 3" ORY and 3" cutout
BFG KDWS tires
New tranny
Removed AIR system
You guys think I will run into the 13.2-4 range? It's an A4.
Re: Estimate on my 1/4 mi time?
Its not that complicated, real simple. It just takes race weight and 1/4 eta and gives a real rough estimate of hp
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
Last edited by tardy007; Sep 5, 2005 at 11:25 PM.
Re: Estimate on my 1/4 mi time?
HP Estimator (ET)
Racing Weight 3503
Et 13.8
Est HP 263.4454288
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
BTW, I think the mathematically mph is a little more accurate
Racing Weight 3503
Et 13.8
Est HP 263.4454288
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
BTW, I think the mathematically mph is a little more accurate
Re: Estimate on my 1/4 mi time?
Originally Posted by tardy007
HP Estimator (ET)
Racing Weight 3503
Et 13.8
Est HP 263.4454288
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
BTW, I think the mathematically mph is a little more accurate
Racing Weight 3503
Et 13.8
Est HP 263.4454288
HP Estimator (MPH)
Racing Weight 3503
MPH 100.31
Est HP 275.9467328
BTW, I think the mathematically mph is a little more accurate
Re: Estimate on my 1/4 mi time?
Originally Posted by camarolover20
Not 13.4's without DR's. I ran 13.7 102 before the headers and lowercontrol arms.So far 13.501 at 104 my best so far with heads and LCA's
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
centric
Automotive News / Industry / Future Vehicle Discussion
6
Aug 15, 2002 09:04 PM



