LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

Don't believe in factory freaks?

Thread Tools
 
Search this Thread
 
Old Nov 9, 2004 | 08:34 AM
  #46  
mattybz28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 408
From: Charleston, SC
Re: Don't believe in factory freaks?

Originally Posted by Shon Herron
I was parked in the grass behind the stands. One of the gazillian Silver Z's with an SS hood and chrome SS wheels, hard to stick out looking like the rest. I need something to make the car different!! I'll figure it out.

60's were in the 2.0 range to 2.2....street tires. Mods are Aerochamber in the stock location, MadZ28 OBDI Conversion, !ks, !front bumper support, hurst shifter and later in the day we put on a CAI and Trick Flow Elbow, which I might add did not seem to help but it started getting much hotter out than the first 2 runs....
haha, yeah i know the feeling about wanting your car to stand out.. My car is white so i got the same feeling and bought a black pannel for the back.. makes the car much differnt. I was the only white and black camaro there.. and had the borla quad tips.

So why did you do the OBDI Conversion? Just for fewer codes and less stuff to worry about? I'm trying to figure out if i should do that, but when I do it I'll do it after i get headers so i can have the car programmed for them at the same time. I'm also planning on puttig the car deep in the 12's just for fun in the next few weeks, but I'm not gonna stop modding the car to make it fast all the time lol
Old Nov 9, 2004 | 11:30 AM
  #47  
1badasZ's Avatar
Registered User
 
Joined: Jan 2001
Posts: 870
From: Florence Mississippi
Re: Don't believe in factory freaks?

mine went 13.40 with CAI, 3.73's, msd, and pulleys. i had a 1.93 60' and i think it has slowed down since the heads n cam
Old Nov 9, 2004 | 12:35 PM
  #48  
ACE1252's Avatar
Registered User
 
Joined: Mar 1999
Posts: 2,068
From: Kernersville, NC
Re: Don't believe in factory freaks?

I ran my 8.6 on only a flowmaster catback and cai. I believe that the 60' reeeaaallly plays a factor on your times. When I have nailed a sub 2 sec 60' that thing gets down the track good.

I'm gald to see your times. Your 1/8 mile time and mph are close to mine. That lets me know that my car will do around 13.3 in the 1/4 if I get the launch correct. Woo Hoo! Can't wait for the cam and roller rockers.
Old Nov 9, 2004 | 04:48 PM
  #49  
mebanditws6's Avatar
Registered User
 
Joined: May 2002
Posts: 622
From: Nashville, TN
Re: Don't believe in factory freaks?

Originally Posted by mattybz28
If you know of an m6 that does any better, let me know. I've yet to see any difference between a4 times and m6 times..
If you're a good enough driver, you can run better in an M6 over an auto time wise. But even still the M6 car will always trap higher than an A4. Less power lost to turn the transmission and the gears are closer ratio which helps a bunch.

Jason
Old Nov 9, 2004 | 05:35 PM
  #50  
ninetythreez's Avatar
Registered User
 
Joined: Sep 2003
Posts: 449
From: southeast USA
Re: Don't believe in factory freaks?

I had a white 93 A4 with 3.23s that did mid-high 13s stock. I added a CAI and pcmforless.com chip and got a 13.4.
Old Nov 10, 2004 | 12:01 AM
  #51  
mattybz28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 408
From: Charleston, SC
Re: Don't believe in factory freaks?

Originally Posted by 1badasZ
mine went 13.40 with CAI, 3.73's, msd, and pulleys. i had a 1.93 60' and i think it has slowed down since the heads n cam
How has your car slowed down with a h/c/i
Old Nov 10, 2004 | 12:02 AM
  #52  
mattybz28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 408
From: Charleston, SC
Re: Don't believe in factory freaks?

Originally Posted by mebanditws6
If you're a good enough driver, you can run better in an M6 over an auto time wise. But even still the M6 car will always trap higher than an A4. Less power lost to turn the transmission and the gears are closer ratio which helps a bunch.

Jason
I understand the gears part, but the lt1 kinda benefits from that.. high torque lower down.. makes good power at lower rpms so it really dones't hurt the car.. The long / fast intake runners are good for that.
Old Nov 10, 2004 | 12:13 AM
  #53  
jbird's Avatar
Registered User
 
Joined: Jun 2003
Posts: 288
From: Myrtle Beach, SC
Re: Don't believe in factory freaks?

Hey guys in SC, where about's is that strip and when does it shut down for the season. I'm in surfside beach w/a '95 formula 'vert A4. Not had it but about a month and a half. stock except for a flowmaster muffler (prev. owner) and a poly trans mount. Thanks for that link to the f-body club man. May try to meet up w/you all sometime.
Old Nov 10, 2004 | 02:03 AM
  #54  
mattybz28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 408
From: Charleston, SC
Re: Don't believe in factory freaks?

I dunno where surfside beach is, but there are local branches of the club that have meetisng.. the lowcountry is the most active from what I understand. Darlington is the track and it's in Darlington SC.. same place as the NASCAR thingy. I dunno when it closes but get on the site, we're planning a Ford vs GM shootout for within the next 2 months i believe.
Old Nov 10, 2004 | 07:19 AM
  #55  
big dave's Avatar
Registered User
 
Joined: Apr 2000
Posts: 564
From: Silver Spring ,Md.
Re: Don't believe in factory freaks?

My stock times are in my sig. Your times are unbelievable but anything's possible. Most people don't believe my times.
Old Nov 10, 2004 | 08:13 AM
  #56  
Antz97ZNJ's Avatar
Registered User
 
Joined: Sep 2000
Posts: 3,223
From: Browns Mills, New Jersey
Re: Don't believe in factory freaks?

Thats extremey fast for your mods...but stranger and more unbelievable things have happen
Old Nov 10, 2004 | 12:04 PM
  #57  
mattybz28's Avatar
Thread Starter
Registered User
 
Joined: Jul 2004
Posts: 408
From: Charleston, SC
Re: Don't believe in factory freaks?

Originally Posted by big dave
My stock times are in my sig. Your times are unbelievable but anything's possible. Most people don't believe my times.
With that 60ft I'd be running the same times as you. You got a built rear or somethin? Cuz it prob won't be goin like that many more times What mods you got done?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
F'n1996Z28SS
Cars For Sale
8
Aug 23, 2023 11:19 PM
rockync7
Cars For Sale
0
Jan 1, 2015 05:10 AM
heavenly_six
Parts For Sale
0
Dec 10, 2014 12:23 AM
regular Joe
Car Audio and Electronics
2
Aug 8, 2002 03:47 PM




All times are GMT -5. The time now is 09:02 AM.