I Know Its A Bad Idea But I Am Dropping My 94 Z28 Off At The Shop In 2 Days So Since Its Just 2 Days How Do I Remove S.e.s. Light

 

remove it as in take out the bulb?

or scan it and figure out why it's on...

not sure what you really mean...

 

unhook your battery for 30 sec. and that will erase the code thats causing the SES light... of course unless you fix the problem the light will come back.

 

I Just Want To Disable It Because My Car Drives Fine For About 20 Minutes Then The Light Comes On And It Starts Jerking And Stumbling All Over The Place And For Some Reason The A.c. Goes From Cool To Hot

 

Ok but you must understand the cause and effect. The SES light is not the cause.. it is the effect. Disabling the SES will not fix anything because its simply the warning light telling you something has gone wrong and you must fix the problem before the light will go away.

 

Thanx For Clearing That Up, Do U Have Any Idea Why It Makes My Air Start Blowing Hot. Just Curious

 

Because your AC compressor shuts off. I dont know why that is happening but try running w/o the AC on and see if the problem goes away.

Im not going to start guessing what is wrong with your car because you could end up spending hundreds of $$$ and still not fix the problem... MANY people have falling in that trap! The best advice I can give is to go get the PCM scanned to see what error code is setting off the SES light.