Coolant Temp. Sensor
Registered User
Joined: Dec 1969
Posts: 27,728
From: Little Rock, AR
Look on my Tech Page for "ECT" and it will show you both locations for the sensors.
I thought the JET installation said to take out the plug on the RH head and put their sensor in there. It is a pain to get to and remove and takes a 5/16" or something square drive to remove it. Some people get brass "T" fittings and put that in one of the heater hoses and mount the sensor there (or you could do it in one of the other sensor locations, I suppose). I think you might have to run a ground wire to the sensor body, if you do it that way.
I thought the JET installation said to take out the plug on the RH head and put their sensor in there. It is a pain to get to and remove and takes a 5/16" or something square drive to remove it. Some people get brass "T" fittings and put that in one of the heater hoses and mount the sensor there (or you could do it in one of the other sensor locations, I suppose). I think you might have to run a ground wire to the sensor body, if you do it that way.
Thread
Thread Starter
Forum
Replies
Last Post