Converted Pro-Action 235 heads, I got them back!
Thread Starter
Banned
Joined: Jan 2002
Posts: 1,935
From: Mobile, Ala..USA
Converted Pro-Action 235 heads, I got them back!
My Pro-Action 235's showed up last Thursday. Ported and assembled by Lloyd Elliot, Converted by CFM.
Isky Tool Room springs
Titanium locks and retainers
2.08 intake 1.60 ex valves
(Thanks for the good deal Bret)
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
David
Isky Tool Room springs
Titanium locks and retainers
2.08 intake 1.60 ex valves
(Thanks for the good deal Bret)
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]David
Registered User
Joined: Oct 2001
Posts: 2,525
From: SoCal
Looks great, David. I love the last quote in your sig....so true.
Thread Starter
Banned
Joined: Jan 2002
Posts: 1,935
From: Mobile, Ala..USA
Flow numbers are as follows:
Flowed ON a 4.030 bore.
No pipe on the exhaust.
Flowed after the heads were milled.(which hurts them a little)
@ 28 inches of water.
Intake/exhaust
.2 145/109
.3 199/140
.4 251/177
.5 292/200
.6 312/218
.650 316/221
.7 318/224
David
Flowed ON a 4.030 bore.
No pipe on the exhaust.
Flowed after the heads were milled.(which hurts them a little)
@ 28 inches of water.
Intake/exhaust
.2 145/109
.3 199/140
.4 251/177
.5 292/200
.6 312/218
.650 316/221
.7 318/224
David
Last edited by FASTFATBOY; Feb 11, 2007 at 08:32 PM.
Registered User
Joined: Jun 2003
Posts: 3,557
From: Carol Stream, Il.
Thread Starter
Banned
Joined: Jan 2002
Posts: 1,935
From: Mobile, Ala..USA
Tell ya what, show me pics of the kidney and we will talk.
David
Registered User
Joined: Jun 2001
Posts: 1,192
From: Hinesville, GA
OOoooohh makes me have a hard time waiting for my heads. I would go pro action if I had to buy heads again, but I got a killer deal on some aluminum dart Pro 1 230's I couldnt pass up and a great deal on a single plane too. They're both getting ported right now...
