Canton pan fitment issues?
07-18-2003, 06:34 PM
#1
Registered User
Thread Starter
Join Date: Jan 2002
Location: Houston, TX
Posts: 442
Canton pan fitment issues?
Been working on trying to get my pan to fit today. I'm getting it, so I don't really need help, just curious to know how the pan has worked for everyone else? Bolt holes don't line up well on mine, and the crank scraper hits (used to) my splayed main caps. Anybody else have problems like this?
Later
Chuck
Later
Chuck
07-18-2003, 06:38 PM
#2
Registered User
Join Date: Aug 2000
Location: Dallas,TX
Posts: 1,071
Mine had a small fitment issue..Thought it was hitting something inside the pan but we excluded everything it could have been and it ended up being the pan..We just used the bolts to pull the pan to the block and everything went in just perfect..no leaks at all since 
Cody
Cody
07-18-2003, 06:38 PM
#3
Registered User
Join Date: Aug 2000
Location: Dallas,TX
Posts: 1,071
Mine had a small fitment issue..Thought it was hitting something inside the pan but we excluded everything it could have been and it ended up being the pan..We just used the bolts to pull the pan to the block and everything went in just perfect..no leaks at all since
Cody
Cody
Thread
Thread Starter
Forum
Replies
Last Post