can the cap be removed from the opti with it still on the car?
Thread Starter
Registered User
Joined: Apr 2002
Posts: 2,310
From: Glendale, Ca
can the cap be removed from the opti with it still on the car?
can I replaced the cap, with just the crank pully off? the pully is still on, so I cant see the opti too well. Also, can it be done with the WP still on?
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally posted by 442olds
you have to pull the water pump and the balancer off. If you can get the pully free of the hub, you don't have to pull the hub off the crank.
you have to pull the water pump and the balancer off. If you can get the pully free of the hub, you don't have to pull the hub off the crank.
Registered User
Joined: Dec 1969
Posts: 27,725
From: Little Rock, AR
Originally posted by Red_94Formula
well yea everything normally would have to come off to get it out but there a few less bolts to remove by leaving it on the motor. for those who are lazy like me will go all out for this!
well yea everything normally would have to come off to get it out but there a few less bolts to remove by leaving it on the motor. for those who are lazy like me will go all out for this!
Not only that, it's usually much better to replace the whole thing, anyway.
Thread
Thread Starter
Forum
Replies
Last Post
chevroletfreak
LT1 Based Engine Tech
202
Jul 4, 2005 05:00 PM
