cam is 224/230 getting springs but need to know about beehives
06-21-2005, 07:44 PM
#1
Registered User
Thread Starter
Join Date: Jan 2005
Location: Beaufort SC
Posts: 476
cam is 224/230 getting springs but need to know about beehives and stock seats
i got the 224/230 xe grind and want a nice spring. i was wondering if they make a beehive that i can install on the factory heads and seats also isntall them to the right height of .600 any info appreciated.
Last edited by snakethis69; 06-21-2005 at 08:08 PM.
06-21-2005, 10:11 PM
#5
Banned
Join Date: Oct 2002
Posts: 6,518
Re: cam is 224/230 getting springs but need to know about beehives
Originally Posted by snakethis69
what about the Comp Cams 977 springs with Titanium retainer? i know a guy selling some.
They are going to be tight.... I would cut the spring pockets to put them on.
Bret
06-22-2005, 07:45 PM
#6
Registered User
Thread Starter
Join Date: Jan 2005
Location: Beaufort SC
Posts: 476
Re: cam is 224/230 getting springs but need to know about beehives
lol i assume he got ahold of you then, and thats the answer, i am not into cutting the heads up. what do those beehives run usually bret? you never got back to me with my heads cam package by the way.
06-22-2005, 08:28 PM
#7
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: cam is 224/230 getting springs but need to know about beehives
Originally Posted by snakethis69
lol i assume he got ahold of you then, and thats the answer, i am not into cutting the heads up. what do those beehives run usually bret? you never got back to me with my heads cam package by the way.
06-22-2005, 08:29 PM
#8
Registered User
Thread Starter
Join Date: Jan 2005
Location: Beaufort SC
Posts: 476
Re: cam is 224/230 getting springs but need to know about beehives
lol, i already deceided on my set up, u just need to get ahold of some springs and hardware for install. something that will hold up to the cam.
06-22-2005, 08:37 PM
#9
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: cam is 224/230 getting springs but need to know about beehives
Originally Posted by snakethis69
lol, i already deceided on my set up, u just need to get ahold of some springs and hardware for install. something that will hold up to the cam.
If anybody knows he will.
06-22-2005, 08:44 PM
#11
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: cam is 224/230 getting springs but need to know about beehives
Originally Posted by snakethis69
yea well now i have to find a set with all the **** so i dont pay out the *** for them
Com'on now ya know ya gotta pay to play.
Hell,if I had some of these peoples money,I'd burn mine.
The last set of springs I bought ,Ti retainers,cups and locks was over $600.00 for a mechanical roller.
06-22-2005, 08:47 PM
#12
Registered User
Thread Starter
Join Date: Jan 2005
Location: Beaufort SC
Posts: 476
Re: cam is 224/230 getting springs but need to know about beehives
screw that i got a budget, and so far i am under and u have most of my parts ordered. so this is one of the last things
06-22-2005, 08:51 PM
#13
Banned
Join Date: May 2003
Location: LA (lower Alabama)
Posts: 6,661
Re: cam is 224/230 getting springs but need to know about beehives
Originally Posted by snakethis69
screw that i got a budget, and so far i am under and u have most of my parts ordered. so this is one of the last things
Didn't know it????
Thread
Thread Starter
Forum
Replies
Last Post
95chwagon
Parts For Sale
4
01-13-2015 09:19 PM