Any affordable widebands available?
04-15-2003, 05:26 PM
#2
Registered User
Join Date: Nov 2001
Location: In a house by the bay
Posts: 2,985
One place I know of is TechEdge.
http://www.techedge.com.au/vehicle/wbo2/kitwb.htm
You can buy one from them or you can buy a kit and build one.
-Mindgame
http://www.techedge.com.au/vehicle/wbo2/kitwb.htm
You can buy one from them or you can buy a kit and build one.
-Mindgame
04-15-2003, 06:30 PM
#3
Registered User
Thread Starter
Join Date: Mar 2002
Location: San Juan PR
Posts: 3,083
HAs anyone used it?? How can you log?? O2 expectancy???
Is there any type of converter so the signal can be fed to the PCM???/
It would be useful if the PCM could log it via something and you can see it on datamaster or something..
Is there any type of converter so the signal can be fed to the PCM???/
It would be useful if the PCM could log it via something and you can see it on datamaster or something..
04-15-2003, 09:39 PM
#5
Registered User
Join Date: Dec 2001
Location: Portage Wisconsin
Posts: 305
usually
You just use it to tune your engine, you get a stand alone monitor, and log your runs then after tuning you remove the wideband o2 as they have a very short life, lucky to get 10k miles on one and they are expensive. A good dyno shop uses them for tuning, then removes them.
kingslam
kingslam
Thread
Thread Starter
Forum
Replies
Last Post
Henson071
Parts For Sale
0
08-04-2015 09:32 AM
CARiD
2010 - 2015 Camaro Interior, Exterior, Paint & Body, Electronics/Car Audio
0
07-07-2015 08:19 AM
1996LT1Z28
Show and Shine / Paint and Body Care
2
12-04-2014 09:20 PM