...It's a little different because I've got really big chambers (60cc)!

I've been trying to get Bret Bauer to make me a cam for a couple months now and I think he's just so busy that I'm never going to get one made. So, any help you guys can provide would be MUCH appreciated and I'm just going to have to order from a major vendor.

The heads are Stage III GTP and the specs are:

Valves: 2.02/1.56
Springs: LS1 Beehive
Chamber: 60cc (already milled to the seats)
Runner: 180.5 cc
Rockers: 1.6
Pics: http://beeph.no-ip.com/heads/

Flow:
63 .100 53
96 .150 87
131 .200 112
162 .250 135
189 .300 155
210 .350 174
230 .400 187
244 .450 200
256 .500 206
263 .550 210
267 .600 215

I'm in a '95 M6 with a stock bottom-end and I really want something that's pretty aggressive with good low-end power (peak power not as important) but it will be daily driven a lot. Any help you guys can give will be REALLY appreciated.

Thanks in advance guys!

 

If it were me and I'd call either Cam Motion or Futral if I couldn't get one from Bret.

 

Thanks for that, it looks like Bret and I just had a misunderstanding and he was waiting on me! So, he's going to come through and my excitement is renewed!

 

Good deal - Bret's the way to go