AI heads+JoeO cam+LT's+Loudmouth=Idle
Registered User
Joined: Feb 2004
Posts: 142
From: Hendersonville North Carolina
what's so great about billet cams? and what is this solid roller motor your talking about? i don't know enough about the crazy **** people do now a days. All i know (mostly) is old school carberuated motors...
Registered User
Joined: Jan 2002
Posts: 1,743
From: Mission, Kansas
Originally posted by 97WS6SCharged
Yeah, as long as you don't want a billet cam.
Yeah, as long as you don't want a billet cam.
I'm also on stock bottem end, and ran a 11.84 at 114.7 with one of Joe's small cams(~220/226) and Lloyd Elliot heads and no power adders. I can't wait to see some #'s out of this setup.
Registered User
Joined: Nov 2001
Posts: 2,985
From: In a house by the bay
Originally posted by 1982z28with18s
Their is nothing wrong with a cast cam. I'm running one of Joe's cams, but cast because I've seen the billet cam tear up the "distributor" drive before on higher mileage motors. When I got the cam I talked with Joe about it and he said he's never seen it, but I figured I'd not take the chance. My car is driven about 35k miles/yr so it'll get lots of miles in no time at all. Difference in price is only about $25.
Their is nothing wrong with a cast cam. I'm running one of Joe's cams, but cast because I've seen the billet cam tear up the "distributor" drive before on higher mileage motors. When I got the cam I talked with Joe about it and he said he's never seen it, but I figured I'd not take the chance. My car is driven about 35k miles/yr so it'll get lots of miles in no time at all. Difference in price is only about $25.
-Mindgame
Thread Starter
Registered User
Joined: Apr 2001
Posts: 2,195
From: Springfield, IL
rpm is set at 900
cam specs huh
lol well lets just say its bigger then a 306 and i prefer to call it "A Hot Cam"
i'm not speaking on Joe's behalf but i imagine he has different stuff he uses
cam specs huh
lol well lets just say its bigger then a 306 and i prefer to call it "A Hot Cam"i'm not speaking on Joe's behalf but i imagine he has different stuff he uses
Last edited by simple; Apr 26, 2004 at 11:45 AM.
Registered User
Joined: Aug 1998
Posts: 1,384
From: Los Angeles, CA
Man...what lsa is that cam on? I have a CC Xtreme 236/242 ground on a 110lsa and it sounds like its stock with the idle set at 950rpm. There must be something seriously wrong with my car....
-B
-B
Last edited by blown383; Apr 26, 2004 at 01:22 AM.
Registered User
Joined: Jun 2000
Posts: 1,542
From: Long Island, NY ; Norfolk, VA
nice to see mindgame is still around.. back to the topic of dfi.. a lil birdie told me dfi could be worth as much as 30hp over a stock pcm tune.. Actually a buddy of mine is doing a back to back test of a stock pcm w/ a tune and a fast setup.. should have numbers sooner or later on that.. i'm anxious to see some real world numbers.. Can't hear your cam as the puter i'm on is a p.o.s but i can only imagine.. Good luck with it.. my bottom end lasted 150K miles.. LTx's are in for the long haul...
Thread Starter
Registered User
Joined: Apr 2001
Posts: 2,195
From: Springfield, IL
Originally posted by StrokerWannaB
DAMN! 11.4X on a stock bottom end. To me that is insanity man.
DAMN! 11.4X on a stock bottom end. To me that is insanity man.
not by me but its been done!
i'm just hoping to get into the 11's
heads are AI full port LT1's 2.00/1.56 valves
