so im getting all the parts gathered up to do heads/cam in my 95 lt1,m6 basically stock with 4.10 gears and 100 wet shot. i already have a brand new cc306 in the both, pro comp 1.6rrs, long tubes ported heads, with huge valves, new 3/8 rocker studs and new guideplates, not sure the specs on them but i picked em up for a 150 bucks they look to be in good shape but i will be taking them to machine shope to have them checked out. and also get the intake ported to match heads. i wanted to get an opinion on what pushrods, lifters, and headgaskets to go with also any other advice on doing the swap would be greatly appreciated