Accel Optispark plug in!

Reply Subscribe

Thread Tools

Search this Thread

Oct 22, 2007 | 11:23 PM

darlandz

Thread Starter

Registered User

Joined: Sep 2007

Posts: 95

From: ohio

Accel Optispark plug in!

Okay so i have installed the new accel optispark on my 1995 chevy camaro z28 and now its seems the plug will not fit all the way down into the unit. Any ideas? how to fix it? or am i doing something wrong?

Oct 23, 2007 | 07:51 AM

jltalon

Registered User

Joined: Jun 2006

Posts: 66

use and dentist mirror and make sure all the pins are lined up, my guess is they are just bent a little bit

Oct 23, 2007 | 02:52 PM

Injuneer

Administrator

Joined: Nov 1998

Posts: 71,094

From: Hell was full so they sent me to NJ

There are different connectors for the unvented (92-94) and vented (95-97) Optis, but you should have the correct connector. Did you by any chance also change the harness?

Oct 23, 2007 | 10:04 PM

darlandz

Thread Starter

Registered User

Joined: Sep 2007

Posts: 95

From: ohio

it is the stock harness here is whats happening i plug it in and push down and sounds like its locking in but i can still see the blue seal sticking out