LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

94 LT1 water pump

Old Nov 22, 2016 | 11:57 AM
  #1  
Big Puddin''s Avatar
Thread Starter
Registered User
 
Joined: Sep 2014
Posts: 10
94 LT1 water pump

Help! I'm stuck trying to get 94 back together. The drive pin for the water pump stayed in the block when I removed water pump. The new water pump has one already installed firmly into the back..both are Firm.
Which would be best for me to remove before installing new water pump? ANd there isn't any o ring on that water pump dowel or drive whatever it's called, is there? Thanks have a great turkey day, big puddin'
Old Nov 22, 2016 | 01:51 PM
  #2  
Chimera96's Avatar
Registered User
 
Joined: Jun 2003
Posts: 1,114
Re: 94 LT1 water pump

there is a spline collar connecting the spline drive from motor and the spline drive on WP

sometimes it sticks to one of those splines. gently pry it off if stuck and clean it and the spline drive sticking out of motor and grease both splines.

FelPro makes a Timing Cover gasket/seal kit for around $12 sold at most auto part stores. It has O rings in it for the WP drive spline

Many change the WP drive seals (included in FelPro kit) when doing the WP. This seal can be tricky to install without folding over the inner lip if you don't have some form of "tool" to do it right. Several "how to" videos on this with purchased or home made tool.

Last edited by Chimera96; Nov 22, 2016 at 01:54 PM.
Old Nov 22, 2016 | 05:18 PM
  #3  
Injuneer's Avatar
Administrator
 
Joined: Nov 1998
Posts: 71,098
From: Hell was full so they sent me to NJ
Re: 94 LT1 water pump

From Shoebox.....

http://shbox.com/ci/water_pump.jpg


Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:20 AM.