i have a'96 Z28 350 LT1 (all stock) what would yall do with 2500$? to upgrade it like engine and all

 

some nice headers, exhaust, gears, cam, and a stall converter if you have an automatic.

 

thanks, im new to most of this, i just got my camaro, im learning though

 

do your research before blowing all your money. Use the search tool on this site for good recommendations on what to get. And welcome to the forum!

 

I would do a search through the old posts as this comes up alot. If you are new, this is the place to be. There is plenty of good info and directions you can go with your car.

 

cool, my camaro had a licence plate holder up front and i like the red chevy imblem where the plate was covering it, but when i took it off there are two holes where the plate was screwed into the bumper. what do yall think i should do?

 

LT headers + ypipe ~$500
Shorties if you have emissions ~$400

Cat back exhaust - starting at $400. Stay away from Flowmaster-stopper

GOOD (Yank/Precision Industries) stall (around 2800rpm) - at least $500. You get what you pay for here .

CAI - $200. All are good.

Gears (3.42' or 3.73's) and install kit $250. Richmond's are noisy, Motive's are not. Both are good quality. Installation (don't do it yourself if you haven't been shown how to and done it with someone before - trust me ) $100 - $400 depending who you can find.


You will need these as supporting mods for a bigger cam.

 

thanks, im trying to beef up my stock Z, the first two things ur mentioned what do they do?

 

a good tune-up and a nice exhaust. Save the rest and enjoy the car.

 

The previous owner of my car did that too. You could try repairing the bumper yourself, or have it professionally done, which can tally around 500 bucks.