So i have a mostly stock motor (stock heads and cam). Would SA roller rockers be ok for this set up?

 

Yup even with a mild heads and cam you'd be pretty good.

-Dustin-

 

Yep, and since you're already in there and depending on the miles on your car. Might as well upgrade the rest of your valvetrain...lifters, pushrods, springs/retainers.

But yes, I have a stock cam and felt the difference will RRs and a dyno tune.

 

The 1.6 RRs will give you an additional .031" lift at the valve over the 1.5s. And, a few extra HP! Fresh valve spings are always a good idea if you have some miles on your engine.

WD