LT1 Based Engine Tech 1993-1997 LT1/LT4 Engine Related

1/4 times on a 94 z????

Thread Tools
 
Search this Thread
 
Old Feb 28, 2003 | 10:16 AM
  #1  
cridom's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 461
1/4 times on a 94 z????

its m6 and it has 47,000 miles
Old Feb 28, 2003 | 10:24 AM
  #2  
stik6shift93's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,110
From: Naperville
If it's stock and in good condition, you're a good driver and aren't at a high altitude. You should be able to pull a 14 flat maybe a 13.8-13.9 if you can hammer the gears good.
Old Feb 28, 2003 | 10:42 AM
  #3  
HungryT/A's Avatar
Registered User
 
Joined: Nov 2002
Posts: 587
From: Hungary, Budapest
I went 14.02 on a track with NO prep or whatsoever, elevating, and about 800-900 meters above sea level.
Oh, yeah, and with a full tank of gas
60'ft was 2.4 , 1/8m 9.4sec
See mods in sig.
Old Feb 28, 2003 | 11:17 AM
  #4  
stik6shift93's Avatar
Registered User
 
Joined: Feb 2003
Posts: 1,110
From: Naperville
Thats a good time, over here at our elevation you probably would have clocked off a 13.7.
Old Feb 28, 2003 | 12:55 PM
  #5  
HungryT/A's Avatar
Registered User
 
Joined: Nov 2002
Posts: 587
From: Hungary, Budapest
Yeah, the first time I ran a 14.15 and was very dissapointed. I thought: Damn, those guys over there are runnin' like mid-to-low 13's with the same bolt-ons...
But then came an LS1 A4 Vette, and ran a 14.1 Than I was told that the "track" goes uphill.

BTW, what is exactly track preparation in the US? Special tarmac, some kind of rubber or what...?
Old Feb 28, 2003 | 01:03 PM
  #6  
chesee48's Avatar
Registered User
 
Joined: Dec 2001
Posts: 3,674
From: Chicago, IL
Here in IL on a crappy track..in WI

Stock, I ran a 14.3 with a 2.4 60ft..

Pretty crappy
Old Feb 28, 2003 | 01:08 PM
  #7  
COMNBYU's Avatar
Registered User
 
Joined: Dec 2002
Posts: 480
if its in good shape (which it sounds like it should be w/ only 47k) and you can drive descent, 13s shouldnt be a problem.

my '96 A4 2.73 car, which technically only has 10 more hp than you, ran a 13.62 @ 102 when stock.




jon
Old Feb 28, 2003 | 01:39 PM
  #8  
chesee48's Avatar
Registered User
 
Joined: Dec 2001
Posts: 3,674
From: Chicago, IL
Originally posted by COMNBYU
if its in good shape (which it sounds like it should be w/ only 47k) and you can drive descent, 13s shouldnt be a problem.

my '96 A4 2.73 car, which technically only has 10 more hp than you, ran a 13.62 @ 102 when stock.




jon
13.6 stock? thats HELLA good...

where are u located???
Old Feb 28, 2003 | 01:44 PM
  #9  
97Z-M6's Avatar
Registered User
 
Joined: Mar 2002
Posts: 2,058
From: near waco tx.
Originally posted by COMNBYU
if its in good shape (which it sounds like it should be w/ only 47k) and you can drive descent, 13s shouldnt be a problem.

my '96 A4 2.73 car, which technically only has 10 more hp than you, ran a 13.62 @ 102 when stock.




jon

what was your 60 ft time an d1/8 mile, if you remember.
Old Feb 28, 2003 | 01:50 PM
  #10  
COMNBYU's Avatar
Registered User
 
Joined: Dec 2002
Posts: 480
Originally posted by chesee48
13.6 stock? thats HELLA good...

where are u located???


just outside of Richmond VA. i normally run at Richmond Dragway which is at sea level. i ran that # this past season before i made any modifications whatsoever.

one thing to note- i ran that time ONE time. never did back it up. i made 3 more passes the same day after the 13.6 and went two 13.77s both at 101 and then a 13.80 @ 100. those runs were all in a row one right after the other so the car never had a chance to cool. the day was almost perfect as well. 60fts on all runs was 2.0X.

normally, the car runs 13.7s-.9s depending on the weather. in the dead of summer the heat/humidity can really take a toll.



jon
Old Feb 28, 2003 | 01:53 PM
  #11  
COMNBYU's Avatar
Registered User
 
Joined: Dec 2002
Posts: 480
Originally posted by 97Z-M6
what was your 60 ft time an d1/8 mile, if you remember.


1/8 on the 13.62 pass was 8.83 @ 81.34. 60ft was 2.01.




jon
Old Feb 28, 2003 | 02:28 PM
  #12  
scottslt1z28's Avatar
Registered User
 
Joined: Sep 2002
Posts: 788
From: Clinton, MS
i would say about 14 to 13.9.....................wow...13.6 stock (i do realize you said you did this only once)......i hope mine runs that, i have yet to test to see....the only different in mine is i have a 3:23 gear ratio...........i have heard people saying 14.1- 14.3 is normal for our cars......i didnt like that ........i hope mine produces like yours does.........assuming i drive it as well and dont spin ........................anyways.....back to the post.........i think about 13.9 to 14..................much higher if you havnt really gotten the hang of driving it yet.......................thats my $.02


Scott
Old Mar 1, 2003 | 12:51 AM
  #13  
cridom's Avatar
Thread Starter
Registered User
 
Joined: Sep 2002
Posts: 461
im kinda new to m6 can anyone give me tips?
or advice how to shift and at what rpms?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
RUENUF
Cars For Sale
1
May 25, 2016 08:10 PM
RUENUF
South Atlantic
4
Mar 13, 2016 03:39 PM
dawg irocz
3rd Gen / L98 Engine Tech
1
Feb 10, 2015 10:33 AM
jayblev95
Track Kill Stories
3
Jan 15, 2015 07:48 AM




All times are GMT -5. The time now is 05:19 AM.