Whisper lid with the K&N filter from SLP?
What gains have you guys gotten with just the lid and nothing else.
The site says 10 rear horsepower but I dunno.
Car is a 2000 Camaro SS
What gains have you guys gotten with just the lid and nothing else.
The site says 10 rear horsepower but I dunno.
Car is a 2000 Camaro SS
Registered User
If you're gonna get a lid, go here.
http://www.texas-speed.com/ls1-fbody.asp
They have a dyno sheet showing how their lid is the best on the market.
http://www.texas-speed.com/ls1-fbody.asp
They have a dyno sheet showing how their lid is the best on the market.
Registered User
I've never had my car dyno'd but I definitely felt a difference when I had my lid installed.
FYI: In reference to the above post, all lids are not the same. Those from Texas Speed look nice. Don't get the lid from LS1 Motorsports, mine is already cracking.
I guess that's what I get. Lesson learned.
FYI: In reference to the above post, all lids are not the same. Those from Texas Speed look nice. Don't get the lid from LS1 Motorsports, mine is already cracking.
I guess that's what I get. Lesson learned.
Registered User
Quote:
Originally posted by ls1camarogal
Don't get the lid from LS1 Motorsports, mine is already cracking. I guess that's what I get. Lesson learned.
Don't say that. I have that lid and it's held up very well for me through two cars. Just because you have one bad apple for a lid, or were destructive to it when removing and putting it back on doesn't mean it's a bad product. Originally posted by ls1camarogal
Don't get the lid from LS1 Motorsports, mine is already cracking.
I guess that's what I get. Lesson learned.
Registered User
Quote:
Originally posted by SiggyBaby
Don't say that. I have that lid and it's held up very well for me through two cars. Just because you have one bad apple for a lid, or were destructive to it when removing and putting it back on doesn't mean it's a bad product.
I've had the lid since late February (<4 months) and it has only been installed once, has never been removed, and was not damaged during installation or shipping. If it was an installer error, I definitely would not have posted the previous statement.Originally posted by SiggyBaby
Don't say that. I have that lid and it's held up very well for me through two cars. Just because you have one bad apple for a lid, or were destructive to it when removing and putting it back on doesn't mean it's a bad product.
where can I find the dyno results for the one from texas-speed.com?
Registered User
With my SLP lid I gained 11rwhp. I then added a Super Sucker and gained 13 more. I went from 299.9rwhp to 324.1rwhp. One other thing to consider. I believe in 2000 they started having an air pump hose coming from the airbox unlike 98-99. Someone correct me if I'm wrong. I have the SLP lid. I believe it's the only one with a hole in it for this purpose. With my 2002 SS I went to AutoZone and got some tubing and a couple of plastic male/male ends. One straight and the other with a 90 degree bend and a grommet. I then connected them to the air pump hose and ran it into my box. Go to Autozone and browse in that section, you'll see what I mean. Looks factory. People who don't have this hole in their lid will just have this mini filter on the air pump hose which I didn't like.
Registered User
Quote:
Originally posted by Schismblade
where can I find the dyno results for the one from texas-speed.com?
Here:Originally posted by Schismblade
where can I find the dyno results for the one from texas-speed.com?
http://www.texas-speed.com/gmhtpAD.gif
http://www.texas-speed.com/images/lids/liddyno.jpg