I'm getting some new exhaust tips and going with the slash-cut Borlas (round intercooled) and I don't know what size. I'm putting it on my stock cat-back, so what size will I need? Thanks

Nate

 

Thar ya go laddy. Check about 3/4 the way down and I think those are the ones you're talking about. I think it should be the 2.25 inch one. But if you get the 2.5 and take it to a shop, they will be able to make it fit if its off a 1/4 an inch. If you buy the too small one, they cant make it fit.
http://www.borla.com/ac.tips/?cartID...68.101.232.148

My recommendation is get an mccord electric cutout at the same time.
Later