t-top rattle fix?
SFC = SubFrame Connectors.
They are a great suspension type mod. Welded ones work better then the slp bolt-ons. They cost about $130 I think plus install is extra of course. They are known to reduce or eliminate squeaks and rattles including the t-top rattle.
You can check around most muffler shops to find one that will weld them on for you.
Good Luck
They are a great suspension type mod. Welded ones work better then the slp bolt-ons. They cost about $130 I think plus install is extra of course. They are known to reduce or eliminate squeaks and rattles including the t-top rattle.
You can check around most muffler shops to find one that will weld them on for you.
Good Luck
SFC
Oh I see now. I didn't make it clear, the t's are not rattling because of flex or looseness when in place, the rattle is inside the plastic housing which covers the lock assembly. I thought I would try to put some rubber gasketing between rattling parts inside it, but didn't see an obvious way to disassemble it.
Originally posted by kkollwitz
Oh I see now. I didn't make it clear, the t's are not rattling because of flex or looseness when in place, the rattle is inside the plastic housing which covers the lock assembly. I thought I would try to put some rubber gasketing between rattling parts inside it, but didn't see an obvious way to disassemble it.
Oh I see now. I didn't make it clear, the t's are not rattling because of flex or looseness when in place, the rattle is inside the plastic housing which covers the lock assembly. I thought I would try to put some rubber gasketing between rattling parts inside it, but didn't see an obvious way to disassemble it.
The handle is held on by a c-clip - pop it off, and the handle will come off easily.
I've tried "jury rigging" mine, and even bought new plastic inserts for the car frame - no luck.
I wind up bending the mounting tabs for a short term fix.
A few days ago, someone posted about putting that liquid foam that dries in, but I have yet to figure out where to put it - if indeed that is even the problem on my SS.
Britt
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
Nayr
LT1 Based Engine Tech
7
Mar 3, 2023 08:34 PM
GusarskiSS
Exhaust System
1
Sep 2, 2015 03:51 PM



