LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

t-top rattle fix?

Thread Tools
 
Search this Thread
 
Old Nov 6, 2003 | 07:49 AM
  #1  
kkollwitz's Avatar
Thread Starter
Registered User
 
Joined: Mar 2002
Posts: 51
From: Greenville SC USA
t-top rattle fix?

My 02 Z28 T-tops have started to rattle....has anyone had success fixing this?
Old Nov 6, 2003 | 08:18 AM
  #2  
95GRNZ's Avatar
Registered User
 
Joined: Dec 1999
Posts: 2,779
From: Denton, TX
Thumbs up

SFC's usually help.

TS
Old Nov 6, 2003 | 08:23 AM
  #3  
kkollwitz's Avatar
Thread Starter
Registered User
 
Joined: Mar 2002
Posts: 51
From: Greenville SC USA
SFC

What's that?
Old Nov 6, 2003 | 09:46 AM
  #4  
darrens99formul's Avatar
Registered User
 
Joined: Jun 2003
Posts: 989
From: Rochester, NY
SFC = SubFrame Connectors.

They are a great suspension type mod. Welded ones work better then the slp bolt-ons. They cost about $130 I think plus install is extra of course. They are known to reduce or eliminate squeaks and rattles including the t-top rattle.

You can check around most muffler shops to find one that will weld them on for you.

Good Luck
Old Nov 6, 2003 | 09:55 AM
  #5  
kkollwitz's Avatar
Thread Starter
Registered User
 
Joined: Mar 2002
Posts: 51
From: Greenville SC USA
SFC

Oh I see now. I didn't make it clear, the t's are not rattling because of flex or looseness when in place, the rattle is inside the plastic housing which covers the lock assembly. I thought I would try to put some rubber gasketing between rattling parts inside it, but didn't see an obvious way to disassemble it.
Old Nov 6, 2003 | 11:35 AM
  #6  
NEWBIE T/A's Avatar
Registered User
 
Joined: Mar 2000
Posts: 835
From: HOUSTON TX USA
Lightbulb T-Top Covers

Originally posted by kkollwitz
Oh I see now. I didn't make it clear, the t's are not rattling because of flex or looseness when in place, the rattle is inside the plastic housing which covers the lock assembly. I thought I would try to put some rubber gasketing between rattling parts inside it, but didn't see an obvious way to disassemble it.
If memory serves me correctly, the cover is held on by phillips screws on either end.

The handle is held on by a c-clip - pop it off, and the handle will come off easily.

I've tried "jury rigging" mine, and even bought new plastic inserts for the car frame - no luck.

I wind up bending the mounting tabs for a short term fix.

A few days ago, someone posted about putting that liquid foam that dries in, but I have yet to figure out where to put it - if indeed that is even the problem on my SS.




Britt
Old Nov 6, 2003 | 05:38 PM
  #7  
Ferocity02's Avatar
Registered User
 
Joined: Feb 2003
Posts: 614
From: Auburn, California
SFC's will help with T-Top rattle only a little, wont completely fix it. You should still get them because they do a lot more as well.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Formula Steve
LT1 Based Engine Tech
45
Sep 19, 2023 08:31 AM
Nayr
LT1 Based Engine Tech
7
Mar 3, 2023 08:34 PM
HibachiZ28
Cars For Sale
5
Nov 6, 2015 12:53 AM
GusarskiSS
Exhaust System
1
Sep 2, 2015 03:51 PM
WPHIG2
Cars For Sale
0
Aug 27, 2015 06:37 AM




All times are GMT -5. The time now is 12:42 AM.