well my sister hit her car door on my driver side door and now i hace a crease that is about an inch long and the paint is not damaged. i was wondering if that crease is possibe to be pulled out or tapped out..has anyone tapped out dents from the door? iam trying not bring to the dealership cause i know something like this will cost alot to do...any tips or suggestions? thanks

 

I don't think so, the doors are not metal.

------------------
2002 SS #3442 Navy blue metallic A4 160 T-stat/TB by-pass/SLP fan swich/DMS SFC's/K&N FIPK/Magna Flow Cat-Back/GMS MAF/SLP Y-pipe/
(Very first run stock with 750 miles)
60ft 2.162 1/8 8.782@83.48 1/4 13.553@102.93
Best to date:
60ft 2.041 1/8 8.612@84.28 1/4 13.326@104.39

[This message has been edited by Drew778/94Z (edited June 23, 2002).]

 

I didn't even know they would dent ... considering that they are either fiberglass or a polymer.

My Saturn wouldn't dent at all, but when hit hard enough, the polymer would crack and/or shatter (been there, done that )

 

You didnt say what year your sisters Camaro is, but if its a 4th Gen, the doors are plastic. You dont fix them.... You REPLACE the door skins.

BTW, the only panels that are metal are the rear quarters and the hood (non-SS or WS6)

[This message has been edited by Kimchee & Rice (edited June 23, 2002).]

 

yes my camaro is a 2000 and the dent on the door is like a crease about an inch long..the paint is not damagd at all..but is visible to see and just curious to see if its possible to popped it out with out any type of body filler on it