Opinions on this intake?
Thread Starter
Registered User
Joined: Jul 2002
Posts: 266
Opinions on this intake?
http://cgi.ebay.com/ebaymotors/ws/eB...tem=1863860849
It reminds me of what I used to do to four-bangers.
Is this anything that I would be able to put on my 2002 SS, that would add power, more than any 'lid' I could use, that would still look respectable?
It reminds me of what I used to do to four-bangers.
Is this anything that I would be able to put on my 2002 SS, that would add power, more than any 'lid' I could use, that would still look respectable?
Registered User
Joined: Nov 2000
Posts: 936
From: Butler, PA
The Volant system and the K&N FIPK are available now. I doubt that you will actually make a lot more power than just a lid. You will, however, pay a lot more for them. You can check them both out at www.tbyrnemotorspots.com
-Mike
-Mike
Registered User
Joined: Mar 2000
Posts: 544
From: H-town, TX
BMR actually has a pretty badass setup now. Check it out at www.bmrfabrication.com It replaces not only the lid and baffles, but also the lower airbox itself.
Registered User
Joined: Jul 2002
Posts: 128
From: Westwood, CA, USA
Screw that (BMR) just get a regular $130-150 lid, a filter, and cut the plastic out of your lower airbox, and you have that SAME thing for $100.00 dollars LESS. Get some cheap washers and raise your air box up a little and its even better
Oh yeah that intake is for the Corvette and is NOT going to work for the SS.
Get a lid and a filter do a little cutting and save yourself some money.
Oh yeah that intake is for the Corvette and is NOT going to work for the SS.
Get a lid and a filter do a little cutting and save yourself some money.
Last edited by ScLeCo; Sep 29, 2002 at 03:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
