Guys,

I'm in the process of removing the AIR system from my 02 Z28. The hoses go into some sort of valve on the rear driver side, with smaller vaccum lines going into some solenoid or something. What do I do with this stuff? Can I remove the valve sitting next to the rear coils? How about the solenoid? How many plugs and what size do I need?
I would very much appreciate an immediate response, as I am in the middle of it!

Thanks in advance!!!!

 

There was nothing left on mine but a couple of empty plugs out of the wire harness. You may have to plug one vacum nipple on the intake, but I used that port for something else. I removed the EVAP at the same time.