LS1 Based Engine Tech LS1 / LS6 / LS2 / LS3 / LS7 Engine Tech

Missed my goal

Thread Tools
 
Search this Thread
 
Old Nov 23, 2008 | 09:39 AM
  #1  
billymz28's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 102
Missed my goal

Just barly missed my goal wanted the 12s so bad before the end of the seoson. I believe the car has it in it i made a 13.04 and a 13.06. I had to hot lap every pass due to getting there realy late and had three pass but had to shut down on one of them due to a rail almost wrecking in front of me and in my lane. Well i will get it for sure next season getting stall and ls6 intake and hopefully a tune. I am proud of the runs because i no it has a 12 in it due to how close i was just wanted this season. I did manage a 5 sec 1/8 mile time thanks to the rail so does that count as a time it was my lane and got the ticket jk.

Last edited by billymz28; Nov 24, 2008 at 06:05 PM.
Old Nov 24, 2008 | 05:58 PM
  #2  
Chrome383Z's Avatar
Registered User
 
Joined: May 2004
Posts: 2,043
From: Shelbyville, IN
cool. put a good stall in it and with traction you'll be mid-low 12s.

I wish I would have gone with the SS4000. The SS3600 is a great converter for a bolt-on car. But I only stayed "Bolt-On" for 6 months. Mild H/C install this winter so I will def need to have mine restalled.

If you plan on a cam in the future save yourself some time and money and get the 4k!!!
Old Nov 24, 2008 | 06:06 PM
  #3  
billymz28's Avatar
Thread Starter
Registered User
 
Joined: Mar 2007
Posts: 102
traction not an issue with the micky thompsons on the drag lights. Will stay a bolt on for a while probally add some spray after stall and intake. Probally just a 75 or 100 shot enough maybe it will make a 11 second pass

Last edited by billymz28; Nov 24, 2008 at 06:08 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Novo
Forced Induction
45
Jun 14, 2016 02:58 AM
93 RedBird
Fuel and Ignition
4
Nov 15, 2015 08:24 AM
WobblySausage
LT1 Based Engine Tech
6
Oct 7, 2015 02:44 PM
WobblySausage
Drivetrain
4
Oct 7, 2015 10:09 AM
tommalcolm
Computer Diagnostics and Tuning
2
Sep 11, 2015 03:39 PM




All times are GMT -5. The time now is 03:51 AM.