Is it feasable or even possible to put LS2 heads cam and tb on an LS1? If so what would need to be done if anything? I have a guy sellin all that for $700 local and the heads are all assembled he says. Worth it as well? Thanks guys.

Jared

 

seems like i read a while ago about a swap that was done. and it actually hurt the power. the heads flowed too much for the engine, same with the intake.

now if you were running a nasty cam...maybe it would pay off.

 

LS2 heads are the same casting as the LS6 heads. They fit, no problem. The LS2 cam probably wouldn't be worth the effort.
I think the LS2 TB is electronic and your f-body is cable driven. That isn't going to work.
Iwould say it is not worth $700.

 

The LS2 TB is electronic aka throttle by wire. I have heard the cam in the ls2 gto is an ls6 cam but I am not too sure.

Charlie

 

Im guessing theres a web site somewhere with the cam specs for the LS2 and LS6 to compare lift etc... hmmm. I will have to do a search later this week I guess. If anyone knows for sure and I dont have to search that would be awesome! Thanks for your help guys.

 

I've never heard of that being a problem with the swap he mentioned.

That's what I've gathered so far.

They vette guys seem to be doing this on a fairly regular basis, tho I haven't read about the LS2 TB yet.

 

That's because all LSanything 'vettes are drive by wire.