Just dynoed my car
01-08-2007, 04:16 PM
#1
Registered User
Thread Starter
Join Date: Apr 2004
Location: Missouri
Posts: 309
Just dynoed my car
The best pull was 321rwhp and 337rwtq. I am very happy with the car. Its 98 ta with mac mids, fake gmmg catback, slp lid, and a tune 100k on the clock. I will have the graph up later on tonight.
01-09-2007, 11:25 PM
#8
Registered User
Join Date: Jan 2002
Location: Oshawa - Home of the 5th-gen
Posts: 5,308
That's actually really good for an auto IMO 
. Obviously the headers are doing their job!! 
Mine dyno'd 289 hp / 307 tq with the A4 / 4.10's a couple years ago. But then I dyno'd it back in the fall after swapping in the T56 and it put down 317 / 335!
(both times were run on Dynojets as well).
...it's clear just how much power the 4L60E's suck up!!
. Obviously the headers are doing their job!! Mine dyno'd 289 hp / 307 tq with the A4 / 4.10's a couple years ago. But then I dyno'd it back in the fall after swapping in the T56 and it put down 317 / 335!
(both times were run on Dynojets as well)....it's clear just how much power the 4L60E's suck up!!
01-13-2007, 05:51 PM
#11
Registered User
Join Date: Apr 2004
Posts: 80
i tuned my car on the dyno and my best pull was 360 rwhp. i have LT headers, lid, and a stage 3 spec. what im wondering is im pretty sure, based on the numbers everyone else has reported that the previous owner of the car put a mild cam in. i dont think i would be pullin these numbers on a stock cam, what do you guys think? my car is a 99 z M6. the guys at my shop said they are pretty positive the heads are stock so that only leaves me to assume a cam had to be put in.
