What would you guys do next to this car I just bought to increase the 1/4 mile performance & HP?
The car is a 1999 Camaro Z28 (Red) with 33,300 miles. The car came with Trac control, T-tops, etc. The mods on the car as I bought the car are; Free mods, SLP Air box, ported air flow meter, BBK headers& Y-pipe, Flowmaster cat back, Moser 12 bolt rear-3.73's, metco LCA's, Hurst shifter and adjustable drag shocks. Everything else seems to be stock. Any idea's on what I should expect to see on a dyno at SLP day at Englishtown this coming October? Thanks for any advise guys,

 

good deal on that car!!!! the rear end alone is worth 1,500 if you wanted to sell it

 

install a cutout on that flowmaster...should see a cool 5-10hp and it's only about $50 installed.

you could also look into maybe a set of pullies or a ported throttle body, or installing an LS6 intake

 

That car is screaming for some heads/cam.

 

Sold on the cutout. For .15 or a 1.5mph gain in the quarter for $50 how can you go wrong. Thanks for the idea. The heads and cam thing will be awhile before I can save those kind of pennies.

 

our heads already flow well so just get a nice fat cam for 400 and then install it urself *isn't that hard to do once you get into it*

then buy a nice nitrous system *dry kit so you don't blow up your intake due to a burp* and you will have more go power than you will know how to handle

 

get some longtubes and get rid of those POS shorties...and def. get a cutout