Head swap HELP
Thread Starter
Registered User
Joined: Dec 2000
Posts: 840
From: Midland,Mi
Head swap HELP
I got this JUNK back together at 4am last night..
Started it and ran like ****.. surged
Im not sure If I got all the vacume lines on right and I forsure need to go back over the rocker arms again..
The interior lights where kinding flickering with the cam chop.
It seems everything if Fine but up top. Good oil Pressure. Cant hear an exhaust Leak.
But It idle's almost like my old Stock Cammed Lt1
I have a 224/224 581/581 on 112 that was already in the car.
Started it and ran like ****.. surged
Im not sure If I got all the vacume lines on right and I forsure need to go back over the rocker arms again..
The interior lights where kinding flickering with the cam chop.
It seems everything if Fine but up top. Good oil Pressure. Cant hear an exhaust Leak.
But It idle's almost like my old Stock Cammed Lt1
I have a 224/224 581/581 on 112 that was already in the car.
Thread
Thread Starter
Forum
Replies
Last Post
dbusch22
Forced Induction
6
Oct 31, 2016 11:09 AM
Brandon Wittmer
General 1967-2002 F-Body Tech
0
Dec 7, 2014 12:15 PM
