Harmonic Balancer Wobble
#1
Harmonic Balancer Wobble
NEW SS 345 HP... PROBLEM EXISTED FROM DAY ONE
HARMONIC BALANCER HAS LATERAL RUNOUT (WOBBLE), APPEARS TO BE BETWEEN .050 & .125, AT LEAST IT IS VERY VISIBLE TO THE EYE.
DEALER REPLACED IT...NEW ONE SEEMS TO WOBBLE WORSE.
LOOKED AT ANOTHER SS...DOES NOT APPEAR TO WOBBLE..
DID I GET A SECOND BAD BALANCER, OR DID THE DEALER INSTALL IT WRONG?
HELP
HARMONIC BALANCER HAS LATERAL RUNOUT (WOBBLE), APPEARS TO BE BETWEEN .050 & .125, AT LEAST IT IS VERY VISIBLE TO THE EYE.
DEALER REPLACED IT...NEW ONE SEEMS TO WOBBLE WORSE.
LOOKED AT ANOTHER SS...DOES NOT APPEAR TO WOBBLE..
DID I GET A SECOND BAD BALANCER, OR DID THE DEALER INSTALL IT WRONG?
HELP
#3
How is this advanced tech?
Anyway the answer is this...
Either the balancer was not seated correctly.
The exterior portion of the crank was milled incorrectly.... but then I would assume that the engine shakes while at idle.
Or.... you got an out of round balancer... (again?)
Anyway the answer is this...
Either the balancer was not seated correctly.
The exterior portion of the crank was milled incorrectly.... but then I would assume that the engine shakes while at idle.
Or.... you got an out of round balancer... (again?)
Thread
Thread Starter
Forum
Replies
Last Post